Drive Heavy Duty Chain
The superior performance of Tsubaki Heavy Duty chains is the result of a comprehensive quality control network that begins with selection of the world’s finest steel materials. It continues with inspection and analysis of quality and performance in 20 different work areas. At Tsubaki quality control is not just a one time check; it is a total dedication. It is your assurance of long lasting and dependable performance.
Tsubaki offers Heavy Duty chains for applications that exceed the capabilities of Tsubaki ANSI G8 standard roller chain. Heavy Duty chain should be considered in the following situations:
- Harsh environments where the chain will be subjected to heavy impact.
- Compact drives for equipment or machines that must work in tight spaces.
- When higher transmission power, allowable load or tensile strength is required.
- When a lower rate of elastic elongation is required.
H Series chain differs from the ANSI G8 Series chain in the thickness of the link plates. The link plates have the same thickness as the link plates of the next larger pitch size in ANSI G8 Series. The increased thickness of the link plates provides a 9% greater capacity for fatigue strength.
Compared to to the previous series, the wear life of the H Series is doubled by using solid bushes instead of curled bushes.
In short, H Series chains are especially suitable for situations where the load is heavy and operating speed is low (up to 50 m/min) or where operating conditions are severe.
HT Series chain provides a significantly higher Tensile Strength (up to 19%) than ANSI G8 Series chain by applying through-hardened pins and link plates of the next larger pitch size in ANSI G8 series.
Compared to the previous series, the wear life of the HT Series is doubled by using solid bushes instead of curled bushes.
HT Series chain also provides a higher fatigue strength and is best suited for low operating speeds (up to 50 m/min). Dimensions of the chain are identical to the H Series chain.
The dimensions of these series are identical to those of ANSI G8 Series chain. The special design of the SUPER Series link plate delivers exceptional performance. The Lube Groove Bushes ensure longer and better lubrication which results in an extended chain life. The pin holes are critically formed and ball drifted, while the pins are through-hardened for greater fatigue strength.
Super Series chains offer 9% higher tensile strength than the equivalent size ANSI G8 Series chain. Super Series chains can be used to replace the next larger pitch size of ANSI G8 Series, making them ideal for applications where chain space is limited. Best suited for low speed operating conditions (up to 50 m/min).
The thickness of the SUPER-H Series link plates is the same as the next larger pitch size of SUPER Series chain. The pins are also through-hardened which provides a higher tensile strength and a higher fatique strength than SUPER Series chain. The pin holes of the outer link plates are critically formed and ball drifted. The holes of the roller link plates are ring coined to increase fatique strength.
SUPER-H Series chains can be used to replace the next larger size of ANSI standard chain, making them ideal for applications where space is limited. Best suited for low speed operating conditions (up to 50 m/min).
ULTRA SUPER Series
ULTRA SUPER Series offer longer wear life, higher shock load resistance and higher tensile strength than any other Tsubaki roller chain. The pins are through-hardened and the pin holes are critically formed and ball drifted. The diameter of the pins has been increased. This chain is well suited for applications where there are space limitations. The heavy duty construction of the ULTRA SUPER Series chain allows it to replace chains up to two pitch sizes larger ANSI G8 Series chain. It is best suited for low speed operating conditions up to 50 m/min